2018 International Residential Code® for One- and Two-Family Dwellings
By International Code Council (ICC)
About your course materials
This comprehensive code comprises all building, plumbing, mechanical, fuel gas and electrical requirements for one- and two-family dwellings and townhouses up to three stories. The IRC contains many important changes such as: An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable. The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall. An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening. The exemption for interconnection of smoke alarms in existing areas has been deleted. New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine. New tables address alternative wood stud heights and the required number of full height studs in high wind areas.
Related study tools
2018 International Residential Code® for One and Two-Family Dwellings, Loose-leaf Version
This comprehensive code comprises all building, plumbing, mechanical, fuel gas and electrical requirements for one- and two-family dwellings and townhouses up to three stories. The IRC contains many…
Frequently asked questions
How do I enroll in or join my course?
How do I redeem an access code, or what if my code isn't working?
Why can't I access my course?
Where can I find my eBook or textbook?
What if I don't have access to my course materials yet?
About this product
This comprehensive code comprises all building, plumbing, mechanical, fuel gas and electrical requirements for one- and two-family dwellings and townhouses up to three stories. The IRC contains many important changes such as: An updated seismic map reflects the most conservative Seismic Design Category (SDC) based on any soil type and a new map reflects less conservative SDCs when Site Class A, B or D is applicable. The townhouse separation provisions now include options for using two separate fire-resistant-rated walls or a common wall. An emergency escape and rescue opening is no longer required in basement sleeping rooms where the dwelling has an automatic fire sprinkler system and the basement has a second means of egress or an emergency escape opening. The exemption for interconnection of smoke alarms in existing areas has been deleted. New girder/header tables have been revised to incorporate the use of #2 Southern Pine in lieu of #1 Southern Pine. New tables address alternative wood stud heights and the required number of full height studs in high wind areas.
Table of contents
- 1.Scope and Administration
- 2.Definitions
- 3.Building Planning
- 4.Foundations
- 5.Floors
- 6.Wall Construction
- 7.Wall Covering
- 8.Roof-Ceiling Construction
- 9.Roof Assemblies
- 10.Chimneys and Fireplaces
- 11.Energy Efficiency
- 12.Mechanical Administration
- 13.General Mechanical System Requirements
- 14.Heating and Cooling Equipment and Appliances
- 15.Exhaust Systems
- 16.Duct Systems
- 17.Combustion Air
- 18.Chimneys and Vents
- 19.Special Appliances, Equipment and System
- 20.Boilers and Water Heaters
- 21.Hydronic Piping
- 22.Special Piping and Storage Systems
- 23.Solar Thermal Energy Systems
- 24.Fuel Gas
- 25.Plumbing Administration
- 26.General Plumbing Requirements
- 27.Plumbing Fixture
- 28.Water Heaters
- 29.Water Supply and Distribution
- 30.Sanitary Drainage
- 31.Vents
- 32.Traps
- 33.Storm Drainage
- 34.General Requirements
- 35.Electrical Definitions
- 36.Services
- 37.Branch Circuit and Feeder Requirements
- 38.Wiring Methods
- 39.Power and Lighting Distribution
- 40.Devices and Luminaires
- 41.Appliance Installation
- 42.Swimming Pools
- 43.Class 3 Remote-Control Signaling and Power Limited Circuits
- 44.Referenced Standards
- 45.Appendix A: Siting and Capacities of Gas Piping
- 46.Appendix B: Sizing of Venting Systems Serving Appliances Equipped with Draft Hoods, Category I Appliances and Appliances Listed for Use with Type B Vents
- 47.Appendix C: Exit Terminals of Mechanical Draft and Direct-Vent Venting Systems
- 48.Appendix D: Recommended Procedure for Safety Inspection of Existing Appliance Installation
- 49.Appendix E: Manufactured Housing Used as Dwellings
- 50.Appendix F: Radon Control Methods
- 51.Appendix G: Piping Standards for Various Applications
- 52.Appendix H: Patio Covers
- 53.Appendix I: Private Sewage Disposal
- 54.Appendix J: Existing Buildings and Structures
- 55.Appendix K: Sound Transmission
- 56.Appendix L: Permit Fees
- 57.Appendix M: Home Day Care- R-3 Occupancy
- 58.Appendix N: Venting Methods
- 59.Appendix O: Automatic Vehicular Gates
- 60.Appendix P: Sizing of Water Piping System
- 61.Appendix Q: Tiny Houses
- 62.Appendix R: Light Straw-Clay Construction
- 63.Appendix S: Strawbale Construction
- 64.Appendix T: Solar Ready Provisions-Detached One and Two-Family Dwellings and Townhouses
Resources
Instructor resources for this title can include manuals, test banks, educator guides, multimedia and companion sites. Sign in to see what is available.
Pricing and formats
Paperback
Loose-leaf

Still need support?




