2021 International Mechanical Code®
By International Code Council (ICC)
About your course materials
Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC® include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.
Frequently asked questions
How do I enroll in or join my course?
How do I redeem an access code, or what if my code isn't working?
Why can't I access my course?
Where can I find my eBook or textbook?
What if I don't have access to my course materials yet?
About this product
Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. The IMC was developed with broad-based principles that make possible the use of new materials, methods and design. Important changes in the 2021 IMC® include: Clothes dryer exhaust terminals required to be at least 3 feet from any opening into a building. Polyurethane spray-applied foam on the exterior of ducts in attics and crawl spaces required to meet specific smoke and flame index limits. Fire and smoke dampers must be provided with approved access for inspection and maintenance. Refrigerant tables updated to include new refrigerants. Addition of condensate termination identification markings and discharge restrictions. Approved factory-built combination intake/exhaust terminations permitted, relaxing separation requirement. 30% reduction in minimum mechanical ventilation for whole-house balanced ventilation systems. Continuous operation requirement for manicure and pedicure station exhaust systems. Grease duct horizontal cleanout required within 3 feet of a horizontal discharge fan.
Table of contents
- Chapter 1. Scope and Administration
- Chapter 2. Definitions
- Chapter 3. General Regulations
- Chapter 4. Ventilation
- Chapter 5. Exhaust Systems
- Chapter 6. Duct Systems
- Chapter 7. Combustion Air
- Chapter 8. Chimneys and Vents
- Chapter 9. Specific Appliances, Fireplaces and Solid Fuel-Burning Equipment
- Chapter 10. Boilers, Water Heaters and Pressure Vessels
- Chapter 11. Refrigeration
- Chapter 12. Hydronic Piping
- Chapter 13. Fuel Oil Piping and Storage
- Chapter 14. Solar Thermal Systems
- Chapter 15. Referenced Standards
- Appendix A. Chimney Connector Pass-Throughs
- Appendix B. Recommended Permit Fee Schedule
- Appendix C. Board of Appeals
- Index
Resources
Instructor resources for this title can include manuals, test banks, educator guides, multimedia and companion sites. Sign in to see what is available.
Pricing and formats
Paperback
Loose-leaf

Still need support?




