Half Title Page.
1: Timber Engineering.
2: Finite Element Model of Mortise and Tenon Joint Fastened with Wood Dowel Using Kempas Species.
3: Strength Assessment of Malaysian Timbers in Structural Size.
4: Dowel-Bearing Strength Properties of Two Tropical Hardwoods.
5: Stiffness Modelling of Non-Metallic Timber Connections with Pultruded Dowels.
6: Mechanical Properties of Cement Composites Incorporating Oil Palm Stem Fiber.
7: Factor of Safety for Dowelled-Double Shear Kempas and Kapur Connections.
8: Evaluation of Dowel-Bearing Strength for Wood Dowel Using ‘Spring Theory’.
9: Ultrasonic Wave Non-Destructive Method for Predicting the Modulus of Elasticity of Timber.
10: Ultimate Strength of Kekatong Glued Laminated Timber Railway Sleepers.
11: Experimental Study to Single Shear Kapur Connection and Comparisons with European Yield Model.
12: Particle Swarm Optimization for Single Shear Timber Joint Simulation.
13: Concrete Waste and Earthquake Engineering.
14: Estimation of Ground Motion in Kuala Lumpur Due to Sumatra Subduction Earthquake.
15: Strength of Quarry Dust Modular Bricks and Wallettes under Compression.
16: A New Lateral Load Pattern Study Based on a Different Limit States.
17: Alkaline Activators Concentration Effect to Strength of Waste Paper Sludge Ash-Based Geopolymer Mortar.
18: Seismic Performance of Laminated Rubber Bearing Bridges Subjected to High Intensity Earthquake Time-History Loading.
19: Chemical Characterization of Used Cooking Oil Foaming Agent as Admixture in Foamed Concrete.
20: Effect of Input Variable for Neural Network Architecture in Predicting Building Damage Subjected to Earthquake.
21: Potential Use of Industrial By-Products for Developing High Strength Concrete UnderNormal Curing Conditions.
22: Seismic Analysis of Reinforced Concrete Structures in Low to Moderate Earthquake Zones of Peninsular Malaysia.
23: A Review of Magnetorheological Elastomers: Characterization Properties for Seismic Protection.
24: Fresh Properties of Self-Compacting Concrete Incorporating Palm Oil Clinker.
25: Flood Management and Intelligence Development.
26: Flood Economy Appraisal: An Overview of the Malaysian Scenario.
27: Neural Network Approach to Coastal High and Low Water Level Prediction.
28: Comparative Study of Flood Frequency Analysis on Selected Rivers in Myanmar.
29: Fluvial and River Engineering Dynamics.
30: Determination of Baseflow Index for Bernam River at Tanjung Malim.
31: Water Sensitive Urban Design in Existing Urban Settings: Case Study of Dry Detention Pond in Kuching City.
32: Enhancing Water Resources and Coastal Engineering Curricula Using Visual Basic Programs in MS-Excel.
33: Regression Analysis for Dimensionless Discharge Ratios Prediction.
34: Potential of Estuary Transverse Flow Salinity Intrusion Due to Extreme Estuarine Flooding.
35: Transportation Systems, Infrastructure and Intelligent Transport.
36: Assessing Pedestrians’ Perspective on the Walkability of Pedestrian Environment under Mixed-Use Development.
37: An Analysis of User Satisfaction on Public Transport Terminal Based on Users Survey.
38: Evaluation of Pedestrian Level of Service for Tehran Crosswalks; Case Study of Nabovat Square in East of Tehran.
39: Physical Properties of Modified Asphalt Binder with Nanopolyacrylate.
40: How Much Money Can Be Saved? Impact of Driving Style on Bus Fuel Consumption.
41: Neglecting Helmet Usage in Rural Area: Behavioral Causal Factors According to Different Age Groups.
42: Pedestrian Egress Behavior during Classroom Evacuation: A Simulation Approach.
43: Geotechnical Engineering.
44: Groundwater Level Detection by Using a Two-Dimensional Electrical Resistivity Imaging.
45: PFA-Cement Mixture for Sand Column Parameter Stabilization.
46: Dynamic Soil Stiffness between WAK, SASW and SCPT Tests.
47: The Influence of Cyclic Load to the Properties of Weathered Granite.
48: Empirical Correlation of P-Wave Velocity to the Density of Weathered Granite.
49: Strength of Soft Soil Stabilized Using Lime-POFA Mixtures.
50: Plasticity Index of Soft Soil Modified with Fly Ash and Oil Palm Shell Activated Carbon.
51: Rock Mass Classification System Used for Pahang-Selangor Raw Water Transfer Tunnel.
52: Electrokinetic Remediation to Remove Heavy Metal from Contaminated Soils Using Purging Solution.
53: Innovative Construction Materials and Structures.
54: Ultimate Load Carrying Capacity of Precast Lightweight Foamed Concrete Sandwich Panel (PLFP) with Double Shear Truss Connectors under Axial Eccentric Loading.
55: Strain Behaviour of Exposed Steel Reinforcement Bars Using FBG Sensor.
56: Mechanical Properties of High-Strength Concrete Reinforced with PVA and Basalt Fibres.
57: Compressive Strength and Density of Unfired Lightweight Coal Ash Brick.
58: Fibre Reinforced Modulus of Elasticity and Compressive Strength of Foamed Concrete.
59: Behavior of Reinforced Masonry Column under Axial Loading Using Sand Quarry Dust Modular Unit.
60: Charpy's Impact Test on Co-Cured In-Line Joint Unidirectional Kenaf Fibre Reinforced Plastic Composite.
61: Active Fatigue Crack Detection and Classification of Reinforced Concrete Beams Using Acoustic Emission.
62: Flexural Behavior of Reinforced Concrete (RC) Beams with Externally Bonded (EB) Carbon Fiber Reinforced Polymer (CFRP) Sheets.
63: Heat of Sorption and Moisture Buffering Properties of Building Insulation Materials.
64: Performance Based Design of Self-Compacting Concrete Incorporating Class F Fly Ash.
65: Mechanical Properties of Modular Cement Block Reinforced with Treated Oil Palm Trunk Fiber.
66: Tensile and Interlaminar Shear Strength of Unidirectional Kenaf Fibre Reinforced Polymer with Overlapping Joint.
67: Compressive Strength of Laminated Rubber Bearing Due to Different Temperature Exposure.
68: Effect of Superplasticizers on Workability of Fly Ash Based Geopolymer.
69: The Effect of Steel Fibre on Flexural Strength of Fibre Reinforced Concrete at High Temperature.
70: Compressive Behavior of Steel Fiber Reinforced Concrete after Exposed to High Temperatures.
71: Bioremediation and Engineering.
72: An Assessment of Water Demand in Malaysia Using Water Evaluation and Planning System.
73: Water Quality Measures Using QUAL2E: A Study on RoL Project at Upper Klang River.
74: Performance of Aquatic Macrophytes on Removal and Accumulation of Sulfate and Potassium from Domestic Wastewater.
75: Greywater Reclamation Using Recycled Vertical Subsurface-Flow Constructed Wetland (RVFCW) for Non Potable Usage.
76: Effect of Water Pressure to Water Loss in Water Distribution Network.
77: Monitoring and Preserving Water Quality Using GIS Tools and Statistical Approach.
78: The Effectiveness of Pseudomonas Putida Atcc 49128 as Biodegradable Agent in Biodiesel Soil Contamination.
79: The Quality of Kenaf Retting Water after Retting Using Bacillus Cereus for Fiber Extraction.
80: Synergistic Innovative Management.
81: Sustainable Considerations in the Operation of Onsite Construction Equipments and Vehicles: A Malaysian Perspective.
82: Factors Contributing to Building Maintenance Performance of Heritage Buildings.
83: Strength, Weakness, Opportunity and Threat Attributes of Malaysian Construction Firms in International Market.
84: Application of Automation Technology in Malaysian Construction Industry.
85: Nano-Materials for Engineering.
86: Alteration of Nano Metakaolin for Ultra High Performance Concrete.
87: Hybrid Nanoparticle-Based XLPE/SiO2/TiO2 and XLPE/SiO2 Nanocomposites: Nanoscale Hybrid Assembling, Mechanics and Thermal Properties.
About the Author.