Innovation, Communication and Engineering, 1st Edition

  • Teen-Hang Meen
  • Published By: CRC Press
  • ISBN-10: 1315815737
  • ISBN-13: 9781315815732
  • DDC: 620
  • Grade Level Range: College Freshman - College Senior
  • 266 Pages | eBook
  • Original Copyright 2014 | Published/Released March 2016
  • This publication's content originally published in print form: 2014

  • Price:  Sign in for price



This volume represents the proceedings of the 2013 International Conference on Innovation, Communication and Engineering (ICICE 2013). This conference was organized by the China University of Petroleum (Huadong/East China) and the Taiwanese Institute of Knowledge Innovation, and was held in Qingdao, Shandong, P.R. China, October 26 - November 1, 2013. The conference received 653 submitted papers from 10 countries, of which 214 papers were selected by the committees to be presented at ICICE 2013. The conference provided a unified communication platform for researchers in a wide range of fields from information technology, communication science, and applied mathematics, to computer science, advanced material science, design and engineering. This volume enables interdisciplinary collaboration between science and engineering technologists in academia and industry as well as networking internationally.

Table of Contents

Front Cover.
Half Title Page.
Title Page.
Copyright Page.
Table of Contents.
Editorial of ICICE 2013 Proceedings.
Advanced Material Science & Engineering.
1: Investigation on Optical Properties of Titanium Dioxide Films from TiO2 and Ti3O5 Starting Materials Annealed at Various Temperatures.
2: A Visible-Blind Mg-Doped ZnO Nanorods Photosensor.
3: Preparation of Thin Palladium Composite Membrane by an Ultrasound-Assisted Electroless Deposition Technique.
4: High Strain Rate Shear Characteristic and Fracture Feature of Inconel 690 Alloy.
5: Optimization of Composite Laminates by a Genetic Algorithm.
6: Synthesis and Characterization of CuInSe2 Thin Film via a Low Temperature Solid State Reaction from CuSe and InSe Powders.
7: Effects of UV Illumination on Oxygen Detection for ZnO Film Prepared by Thermally Oxidized Zn on Sapphire Substrate.
8: Using Taguchi Method for Prepared Gel Electrolyte and Applied in the Dye-Sensitized Solar Cells.
9: Thermoelectric Properties of Bi2Te3 Thin Films Prepared by Thermal Evaporation Method.
10: Self-Assembly and Gelation Mechanism of Poly(3-Hexylthiophene) Polymer Chains in Xylene Solution.
11: Annealing Effect on the Optical and Electrical Properties of Al-Doped ZnO Transparent Conducting Films.
12: Optimization of Small Molecule Organic Solar Cells Based on Boron Subphthalocyanine Chloride (SubPc) and Fullerene (C60).
13: Effect of Multi-Trapping Layers on High Color Stability of White Organic Light-Emitting Diode (WOLED).
14: A Study on the Influence of Cooling Processing on Residual Stress in Carbon Fiber Reinforcement Polymer during the Curing Process of Composite Laminates.
15: Using the Taguchi Methodology for Optimizing of Porosity Formation in Automobile Starter Motor Casing in Pressure Die Casting.
16: Effect of Alkaline Sources on the Characteristics and Photovoltaic Performance of Vertical ZnO Nanorods-Based Dye Sensitized Solar Cells.
17: Surface Hardening of Ti-15V-3Al-3Cr-3Sn Alloy after Cyclic Hydrogenation and Subsequent Solution Treatment.
18: Co-Sensitization Effect of Orgnic/Inorganic Dyestuffs in Dye-Sensitized Photovoltaic Cells.
19: Fabrication of Open-End TiO2 Nanotubes Arrays on Front-Illuminated Dye-Sensitized Solar Cells.
20: Triazoloisoquinoline Based Co-Adsorbent in Dye-Sensitized Photovoltaic Cells.
21: Sn/3.0Ag/0.5Cu Tin Ball Tensile Creep Test.
22: Structures of Polyethylene (PE) Chains in the Square and Triangle Array Swcnt Matrixes.
23: Synthesis of Thick DLC Film by Hot Filament Assisted Magnetron Sputtering.
24: Properties of As-Deposited AZO Films Made by RF Magnetron Sputtering.
25: Characteristics of UV Photosensors with TiO2 Nanorods.
26: Analysis of Transparency Conducting AZO Films by DC Magnetron Sputtering.
27: Investigate the Characteristics of Bi2O3-Added 0.35 (K0.5Bi0.5TiO3)-0.65 BaYiO3 Ceramics.
28: Mechanical Properties and Cd-Free Buffer Layer for CIGS Solar Cell.
Communication Science & Engineering.
29: The Effect of Tip-Lens on Coupling Efficiency of Plastic Optical Fiber Coupler.
30: Implement the Tracking and Management System Applied to Mobile Medical Monitoring Instruments in Ward Nursing Station.
31: Dual-Band Meandered Loop Antenna for WLAN Dongle Application.
32: A Printed PIFA Antenna for Mobile Handset Application.
33: Dual-Band Loop Antenna on Soft Contact Lens for Wireless Ocular Physiological Monitoring.
34: A SVM and RSSI Model for In-Hospital LBS Technology.
35: A Fiber Optic Grating Array Sensor System for the Bridge Monitoring.
36: Study on a Fiber-Optic Sensor for Debris Flow Monitoring System.
37: CPW-Fed Monopole Dual-Band Ceramic Substrate Antenna with Meandered SIR Loading and Ellipse Defected Ground Plane.
38: Exploring the Relationship between Website Interactivity and User Experience.
39: Phase Diversity Method Embedded with Optical CDMA on Radio-Over-Fiber Transmissions.
40: Design of a Smartphone System for Calculating Calorie Consumption by Considering Altitude Information.
41: Understanding the Effectiveness of BIS Parametric Model for Monitoring Sedation and Depth of Anesthesia in Pediatric Surgery.
42: Development of Active Directional Antennae for Use in Small UAVs.
Computer Science & Information Technology.
43: Recreational Devices Controlled Using an SSVEP-Based Brain Computer Interface (BCI).
44: Understanding Users' Intentions to Continue Using Social Media: The Role of Cognitive Absorption, Social Network, Social Presence.
45: The Implementation of Contrast Media Injection Control and Monitoring Systems in the Department of Radiology of Medical Center.
46: A Study on Auction Strategy for Keyword Search.
47: A Feasibility Study of Unity3D Interactive Engine Development.
48: An Objective Identification of Spectral Distinctiveness on Acoustic Cue to Subjects with Hearing Loss.
49: A Novel Hybrid FDM, AHP, TOPSIS Approach for Successful Serious Game Design and Evaluation Framework.
50: The Dynamic Investigation in the Subject of Science and Technology for Elementary School Students.
51: Design of a Fall Detection System Based on Wireless Sensor Network.
52: The Research of the Self Cognitive Body Figure and the Healthy Concepts Influencing the BMI of Children.
53: New Approach to Cloud-Based Enterprise Resource Planning System.
54: An Exploration of Security and Privacy among Cloud Computing.
55: An Assessment of Masses Regards to Shape.
56: The Exploratory Study on Students' Motivation of Using Human-Computer Interaction Technology: An Empirical Study of Second Life for Virtual Reality.
57: Constructing an Interactive Multimedia Lesson Plan that Fits in Teaching Scene.
58: Unity3D Game-Based Learning System.
59: An Efficient Framework for Winning Prediction in Real-Time Strategy Game Competitions.
60: Electrical & Electronic Engineering.
61: Improved Mechanism of Ni/Au Schottky Contact on Surface Treated ZnO Film.
62: Impact of a Photovoltaic System to Voltage Variation and Power Losses on Distribution Feeders.
63: Design of 3.1–10.6 GHz UWB CMOS LNA Using RC Feedback and Self-Body Bias Technology.
64: Various Nanopillars on GaN-Based LED to Enhance Light-Extraction Efficiency by SILAR Method.
65: Improvement of Current Blocking for GaN-Based LEDs by Treatments of Ar Plasma on P-GaN Surface.
66: Enhanced Light-Extraction Efficiency in GaN-Based Light-Emitting Diodes via Nanopillars on Roughened Surface.
67: Development of a Hub Motor with an Integrated Transmission Hub for Electric Bicycles.
68: Design of Low Voltage and Low Power 0.32V 0.4 mW Based on Current Reuse VCO with Transformer Feedback and Body-Biasing Techniques.
69: Determination of Thrust Drop for High Speed Maglev Train Driven by Linear Synchronous Motor.
70: The Simulation of Software-Defined Nonlinear Multi-Stage Rectifier and Power Matching for Wireless Power Transmission.
71: Light Rail Transit Systems Impact on the Unbalance of the Distribution System.
72: A Wisdom LED Street Lamp System Combining with Power and Solar Cells.
73: Investigation of Modulation Strategies for Three-Phase Three-Level Rectifier Applications.
74: Design and Implementation of a Micro-Inverter for Grid-Connected Applications.
75: A Novel Ohmic Contact Method for Al/N-Si by Inserting Ultra-Thin LiF.
76: Design of Photo Detectors for Measuring Solar Power.
77: Design of Dimmable LED Lighting Sets with Three Windings Multiple Transformers.
78: Hybrid Grey Model for Taiwan Electronic Product Forecasting.
79: Realization of a Three-Axis Motion Control System Based on DSP and FPGA.
80: Motion Control of Meal-Assistance Based on a Five-Axis Modular Robot Arm.
81: Application of Genetic Algorithm in Optimal Robotic Path Planning.
82: Gesture Motion Based Interactive Control System for Humanoid Robots.
83: IoT Applied in Data Transceiver.
84: Visual Control of a Stair-Climbing Robot.
85: Adaptive Fuzzy CMAC Controller Design for Tracking of Four-Wheeled Omnidirectional Mobile Robot.
86: Effects of Deposition Power on the Properties of the Heterojunction Diode Based on a Nio/Gzo Bi-Layer Structure.
87: A Machine Learning Approach to Dynamic Programming for Stochastic Process of Speech Recognition.
Mechanical & Automation Engineering.
88: Using CC-Link Industrial Communication on the Implementation of Motor HMI Monitoring in Lab Practice.
89: Micro-Orifice Structure Fabricated Using a One-Step Undercut Etching Technique for Ultra-Small Water and Chitosan Droplets Formations.
90: Optical Fiber Concentration Sensor Based on Whispering Gallery Mode Interference.
91: Design and Fabrication of the Piezoelectric Actuator with Double Pushers.
92: Construction of the Control System of Cleaning Robots with Vision Guidance.
93: Ultrasound for Optimizing Dark-Fermentation Hydrogen Production.
94: Noise Analysis of Wagon Transportation.
95: Effect of Preforms on Extrusion Die Filling of Micro Brass Pin.
96: Intelligent Vision-Based Trajectory Planning for Spray Painting Using Manipulator.
97: Seawater Desalination Using Electrodialysis Process.
98: The Design and Fabrication of a Two-Axis Solar Heat Collection Tracker for Stirling Engine Applications.
99: Design Optimization on the Lower Arm of Motorcycle Chassis Using Laminated Structure with Foam-Core Material.
100: Delay Pressure Detection Method to Eliminate Pump Pressure Interference on the Downhole Mud Pressure Signals.
101: A Novel Application for Enlarge Focus Area Based on High Intensity Focused Ultrasound (HIFU) Probe with a High Directivity Structure Design.
102: Dynamics Stress Analysis for a High Rigidity Bendable Minimal Invasive Surgical (MIS) Instrument Design.
103: Effects of Heat Loss and Friction on the Performance of an Air Standard Dual Cycle.
104: Performance Characteristics of Multi-Port Gas Burners.
105: Nonlinear Vibration Analysis of Platform due to the Base Periodic Excitation.
106: Strength Analysis of Blade of a Vertical Wind Generator.
107: A Study of Automatic Welding System for Spatial Position Measurement.
108: An Optimization Study of Coandã Wall Jet Phenomena.
Green Technology & Architecture Engineering.
109: Effects of Heat on Building Materials.
110: Analysis of Indoor Sound Propagation Using Finite Element Method.
111: Numerical Simulation and Design Strategy for Wind Environments: A Case Study of the Typical Southern Fujian Village.
112: The Establishment for Home-Ventilation Soundproof Walls by the Nature-Landscape Basis Model.
113: A Structural Design for Soundproof Ventilational Environment with High Performance and No Energy Consumption.
114: Efficiency Improvement of a Diffusive Solar Cell Window by Optimizing the Diffusion Plate Design with Optical Simulation.
115: Research on Bamboo Craft Development from Perspective of Green Design.
116: Electric Field Analysis for a Novel Dual-Electrode Plug with Low Ignition Voltage Requirement.
117: Study of Green Building Indicators in Taiwan Sport Stadiums.
118: A Study of Constructing the Green Indoors Sustainable Aquatic Center.
119: High Conductive and Transparent Poly(3,4-Thylenedioxythiophene): Poly(Styrenesulfonate) Films by Adding the Sulfuric Acid in Solar Cell.
120: Application of Power Electronics Technology in Renewable Energy Generation Systems.
121: Using Web-Based Service to Enhance Communications in Design Process.
Innovation Design & Creative Design.
122: A Study on the Evaluation of Sleeping Effect for the Photo-Induced Biofeedback Fabric.
123: Usability Evaluation and Investigation of Subjective Satisfaction of the Online Publishing Software Interface.
124: A Study on Information Visualization with Smart Living Technology – Example by an Interactive Product “Serenity”.
125: A Study on the Integration of Holograms and Package Display Technology.
126: Construction of Innovative Service System Dresses for Wedding Photography.
127: Exploration on the Use of Recycled Plastic Bottles for Toy Development.
128: Application of CAN Bus Monitoring System for Ford Mustang Cluster.
129: A Learning Achievement Prediction Model for Meaningful Learning Designs.
130: Employing Logistic Service Model in Eco-Design Modular Furniture System.
131: Investigating Novel Applications of the Coanda Effect for Small Morphing Unmanned Aircraft.
132: An Analysis on Kenyahara and “Void” Design Concept of MUJI.
133: Fabrication of an 3D Aspherical Microlens for OLED with PDMS Modified Using a Dry Etching Process.
134: A UTV Hand Tool Measure the BMD of Calcaneus—A Simulation Model.
135: A Study on Julia Sets to Generate Visual Aesthetic Fractal Patterns.
136: A Study on Network Platform of Corporate Strategy.
137: A Research of Assistive Devices' Design by Using QFD – Positioning Chairs for CP Children as Example.
138: Persuasive Design Aid for Products Leading to Happy, Healthy and Sustainable Lifestyle.
139: An Extensive QFD Procedure for Bicycle Innovative Design.
140: Investigating Performance and Preference for Novel 2D and 3D Bookmark User Interfaces.
141: Enjoy Aging: Blending Cultural Creativity with Technology.
142: Driving Technological Innovation through Collaboration with Design Professionals.
143: The Appearance Innovation of Convenience Store Figurines in Taiwan.
Industrial Design & Design Theory.
144: Apply Web-Based Analytic Tool in Stapler Product Form Design.
145: Application of Content Analysis Method in Constructing Evaluation Indicators of Design Students' Competitive Advantage.
146: Head and Neck Support for Cabin Seat.
147: User Autonomy: Creative Experience in the Process of Interaction.
148: A Study on the Consumer Purchasing Behavior and Visual Focus of DSLR Digital Cameras.
149: Decision-Making Mode of Sustainable Product Development under EuP (Eco-Design Requirements for Energy-Using Product) Directive.
150: The Affective Meanings Influencing Aesthetic Preferences.
151: The Comparison of Exploring Realism between Various Model Types on Car Styling Design.
152: An Interactive Influential Model of Sustainable Product Development under Corporate Social Responsibility in Taiwan.
153: A Novel Design of Lateral Coachwork for Noise Reduction of Mass Rapid Transit (MRT).
154: Customer-Oriented Product Design Using an Innovative Integral Scheme Based on Kansei Engineering and Kano Model.
155: Computational-Fluid-Dynamics Simulation for Charged-Membrane Filtration with Spacer Design.
156: An Initial Study on the Attitudes of New Young-Olds in Taiwan Towards Electronic Pets.
157: Pattern Search and Style Analysis for the Design of Comic Figures.
158: Study on Development Strategy of Sustainable Product Design in Product Service System: Using ASUS Technology Products as an Example.
159: Exploring Emotional Design of User's Needs – Green Products as Example.
160: Design Management for Positive Creativity.
Cultural & Creative Research.
161: On the Relations between the Colour of Museum Collection Derivation Commodity and Its Cultural Connotation: A Case Study of the Wooden Deity of the Lord Tiger.
162: The Development and Creating Methods in Digital Ink Painting.
163: A Study of the Experimental Teaching on Sense of Space and Stereo Visual Illusion.
164: A Study of Cultural and Creative Commodity Innovation in the Design Business of the Indicator.
165: On the Graphic Ornamental Pattern of the Kinmen Traditional Architecture.
166: On the Geometric Arrangement of Wufeng and Banqiao Lin Family Mansion and Garden in Taiwan.
167: Discussion on the Research Model of Traditional Settlement from the Perspective of Cultural Routes—Take Tai-Min Area for Instance.
168: Development of Medical Care in Southern Taiwan – Medical College and Hospital National Cheng Kung University in Case.
169: Kunishima Suiba's Comic Illustrations of Taiwan: The Presentations of Colonized Culture under Japanese Colonial Rule.
170: The Development of Taiwan's Siraya Local Industries – Learning from Yomitan Village, Okinawa.
171: Establishing Principles and Model of Sustainable Product Development for Enterprises under Rental Consumption of the Product Service System in Taiwan.
172: The Classics-Reading Education Modeling Exploration for Elementary Schools in Taiwan through an Application of CORPS Framework.
173: A Study on Design of Manipulation of Shadow Puppet Game-Based Learning with Kinect Technique.
174: Research on the Methods of Building Brand Image from the Multimedia Perspective.
175: A Study on Digital Value-Added Applications of Chinese Calligraphic Fonts.
176: Examining Artistic Commodity Design through the Shift between Art and Design.
177: The Research of Interactive Performance with Puppet in Digital Technology Environment.
178: Interaction of Space-Time Effect between De Qi of Acupuncture and Cerebral Cortex–The Clinical Application in Combined Treatment of Acupuncture, Steroid and Hyperbaric Oxygen Therapy in Sudden Deafness.
179: A Discussion on Trademark Designs of Taiwan's Popular Designer Fashion Labels.
180: Tackling the Myth about the Chinese Translation of the Word “Religion” by means of Etymological Analysis.
181: Preliminary Investigation into the Roadside Banquet Culture in Taiwan.
182: Symbolic Analysis and Metaphorical Character of Ancient Chinese Lighting Fixtures.
183: Lotus Born from Silt: Drawing from Tang Ya Lay's Works to Explore the Use of Reservoir Silt in Ceramics.
184: Creative Sales for Fruit Vinegar – a Market Example Based on Tang Po Vinegar.
185: The Creatively Innovation of Shanghai-Style Cheongsam in Taiwan – Citing Londee and Shiatzy as Examples.
186: A Study on Development of Industries Related to Agarwood – Taking Pingtung Region in Taiwan as an Example.